No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R013C00 Web-based Configuration Guide

This document describes how to configure and maintain devices through the web NMS client, including device status statistics, SVF, interface, Ethernet switching, IP service, IP routing, security, ACL, AAA, system management, QoS, diagnosis service, and EasyDeploy.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
System

System

File Management

Context

The web system provides file management functions to facilitate user operations. Figure 7-15 shows the File Management page.

Figure 7-15  File Management page

Procedure

  • Upload files.

    You can upload local files to a switch.

    1. Choose Maintenance > System Maintenance > System and click the File Management tab.
    2. Click Upload.
    3. Select local files to be uploaded and click OK. After the files are uploaded, the system displays a message indicating the successful upload.

      NOTE:
      • You cannot upload a file with the same name as files in File Management.
      • You can only upload files with the following file name extensions: .cc, .pat, .zip, .7z, .txt, .log, .dblg, .cfg, .dat, .bat, .jpg, .jpeg, .png, .pem, .p12, .cer, .bin, .mod and .xml.
      • If the security level of the web browser is too high, the message "The security level of the browser is too high" may be displayed when you attempt to upload a file, as shown in Figure 7-16. In this case, choose Internet Options > Security, and click Custom level. In the displayed dialog box, set Initialize and script ActiveX controls not marked as safe for scripting and Include local directory path when uploading files to a server to Enable, as shown in Figure 7-17 and Figure 7-18.
      Figure 7-16  Exception message displayed on the web
      Figure 7-17  Enabling "Initialize and script ActiveX controls not marked as safe for scripting"
      Figure 7-18  Enabling "Include local directory path when uploading files to a server"

  • Download files.

    You can download files from the switch to a local device.

    1. Choose Maintenance > System Maintenance > System and click the File Management tab.
    2. Click next to a file to download the file.

      NOTE:
      You can only download files with the following file name extensions: .cc, .pat, .zip, .7z, .txt, .log, .dblg, .cfg, .dat, .bat, .jpg, .jpeg, .png, .pem, .p12, .cer, .bin, .mod and .xml.

  • Move files to the recycle bin.

    After files are moved to the recycle bin, they still exist on the switch. You can restore the files in the recycle bin.

    1. Choose Maintenance > System Maintenance > System and click the File Management tab.
    2. Select the file to be deleted.
    3. Click Delete.
    4. Click OK in the dialog box that is displayed.
  • Delete files permanently.

    You can permanently delete files from the switch.

    The files deleted permanently cannot be restored.

    1. Choose Maintenance > System Maintenance > System and click the File Management tab.
    2. Select the file to be deleted.
    3. Click Delete Permanently.
    4. Click OK in the dialog box that is displayed.
  • Restore files.

    You can restore the files in the recycle bin to the storage device.

    1. Choose Maintenance > System Maintenance > System and click the File Management tab.
    2. Select the file to be restored.
    3. Click Restore File to restore the file. The file will be removed from the recycle bin.
  • Delete files from the recycle bin.

    The files in the recycle bin still occupy storage space. You can delete unnecessary files permanently from the recycle bin to save the storage space.

    1. Choose Maintenance > System Maintenance > System and click the File Management tab.
    2. Select the file to be deleted permanently.
    3. Click Delete Permanently.
    4. Click OK in the dialog box that is displayed.

System Time (Cloud management mode)

Procedure

  1. Choose Maintenance > System Maintenance > System and click the System Time tab to display the current system time, as shown in Figure 7-19.

    Figure 7-19  System Time

System Time (Traditional management mode)

Context

Generally, the daylight saving time (DST) is configured in the summer, and the DST ranges from one day to one year. Therefore, the end time of daylight saving time must be more than one day but less than one year later than the start time.

To ensure effective communication between the switch and other devices, set the system time correctly.

Procedure

  • Time Zone Settings
    1. Choose Maintenance > System Maintenance > System and click the System Time tab, as shown in Figure 7-20.

      Figure 7-20  System Time

    2. Select a time zone from Select time zone and set DST to ON, as shown in Figure 7-21.

      Figure 7-21  DST Setting

      Table 7-7 describes parameters on the page.

      Table 7-7  DST parameters

      Parameter

      Description

      The following parameters are valid only when DST Type is set to Absolute.

      Effective time

      Specifies the start and end time of the absolute DST.

      DST difference

      Specifies the DTS difference.

      The following parameters are valid only when DST Type is set to Timely.

      Start time

      Select By week or By date to set the start time of DST.

      End time

      Select By week or By date to set the end time of DST.

      DST difference

      Specifies the DTS difference.

      Start and end years

      Specifies the start and end years of a periodic DST.

    3. After setting the parameters, click Apply.
  • Date and Time Settings

    Choose Maintenance > System Maintenance > System and click the System Time tab, as shown in Figure 7-20.

    Current system time displays the current date and time.

    • Automatic synchronization
      1. Click Auto.
      2. Set NTP server IP address and click Add to specify a remote NTP server.
      3. Click Apply to complete the configuration.
    • Manual setting
      1. Click Manual.
      2. Set Date and Time.
      3. Click Apply to complete the configuration.

      The new date and time is displayed.

      • If the new time is 10 minutes later or 720 hours earlier than the scheduled reboot time, the system will display a message as shown in Figure 7-22, asking whether you want to disable the scheduled restart function.
        Figure 7-22  Information page

      • If the system time is changed to no more than 10 minutes later than the scheduled restart time, the system will display a message as shown in Figure 7-23, asking whether you want to restart the device immediately.
        Figure 7-23  Warning page

System Info

Context

NOTE:

This function is not supported in the cloud management mode.

Procedure

  1. Choose Maintenance > System Maintenance > System and click the System Info tab, as shown in Figure 7-24.

    Figure 7-24  System Info

    Table 7-8 describes the parameters on the System Info page.

    Table 7-8  Parameters on the System Info page

    Item

    Description

    Device name

    Indicates the device name. This is a mandatory parameter. You can click Restore Default Name to restore the default device name.

    HTTP timeout interval (min)

    Specifies the timeout interval of the HTTP connection.

  2. Set the parameters.
  3. Click Apply to complete the configuration.

Initialization

Context

If improper configurations have been performed on the switch, you can restore the factory settings of the switch.

After you click Initialization, all the configurations that you have made on the switch will be deleted and cannot be restored. The original management IP address becomes invalid and the web system is unavailable. Use a serial cable to connect to console interface of the switch and your PC to reconfigure the switch.

Procedure

  • Restore the factory settings.
    1. Choose Maintenance > System Maintenance > System and click the Initialization tab, as shown in Figure 7-25.

      Figure 7-25  Initialization

    2. Click Initialization.
    3. Click OK in the dialog box that is displayed.
  • Reset the Boot password.
    1. Choose Maintenance > System Maintenance > System and click the Initialization tab, as shown in Figure 7-25.
    2. Click Reset Root Password to restore the BootLoad password to default values.
    3. Click OK in the dialog box that is displayed.

Service Management

Procedure

  • Configure the Telnet service.
    1. Choose Maintenance > System Maintenance > System and click the Service Management tab, as shown in Figure 7-26.

      Figure 7-26  Service management

    2. Set the Telnet status to ON or OFF.
    3. Click Apply and click OK in the displayed dialog box to enable or disable the Telnet service.
  • Configure the STelnet service.
    1. Choose Maintenance > System Maintenance > System and click the Service Management tab, as shown in Figure 7-26.
    2. Set the STelnet status to ON or OFF.
    3. Click Apply and click OK in the displayed dialog box to enable or disable the STelnet service.

Greeting Configuration

Procedure

  1. Choose Maintenance > System Maintenance > System and click the Greeting configuration tab, as shown in Figure 7-27.

    Figure 7-27  Greeting configuration

  2. Enter greetings in the text box.

    NOTE:

    The value of Greeting is a string of 1 to 242 characters.

  3. Click Preview to preview the greeting on the web page.
  4. Click Apply. In the dialog box that is displayed, click OK.
Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100066172

Views: 7383

Downloads: 11

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next