No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S600-E V200R013C00 Web-based Configuration Guide

This document describes how to configure and maintain devices through the web NMS client, including device status statistics, SVF, interface, Ethernet switching, IP service, IP routing, security, ACL, AAA, system management, QoS, diagnosis service, and EasyDeploy.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
User Timeout

User Timeout

If you do not perform any operations on the web system GUI for a long time, you are logged out and the login page is displayed. Figure 3-5 shows the login page. If you need to continue operations, log in again.

Figure 3-5  Login page

By default, the timeout period for a login user is 20 minutes. You can change the timeout period on the System Info page.

Changing the Timeout Period

Choose Maintenance > System Maintenance > System and enter the new timeout period on the System info page, as shown in Figure 3-6. Click Apply.

Figure 3-6  Setting system information
Updated: 2019-04-08

Document ID: EDOC1100066172

Views: 7353

Downloads: 11

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next