No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CloudBackup Feature Guide

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3, and Dorado18000 V3. It describes the implementation principles and application scenarios of the CloudBackup feature, and explains how to configure and manage CloudBackup.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Creating a Proxy

(Optional) Creating a Proxy

You must create a proxy if the backup storage type is S3 and the enterprise's data center must use a proxy to access the external network.


You have obtained the information about the proxy server.


  1. Choose Data Protection > CloudBackup > Basic Settings > Proxy.
  2. Click Create.

    The Create Proxy dialog box is displayed.

  3. Set the proxy parameters listed in Table 2-5.

    Table 2-5 Proxy parameters





    Name of the proxy server.

    [Value range]

    • The name must be unique.
    • The name contains 1 to 31 characters.
    • The name can contain only letters, digits, underscores (_), periods (.), hyphens (-), plus signs (+), and at signs (@).


    IP address or domain name of the proxy server.

    [Value range]

    • The domain name contains 1 to 255 characters.
    • The domain name can contain only letters, digits, periods (.), and hyphens (-), and must not start or end with a hyphen.


    Port number of the proxy server.

    [Value range]

    1 to 65535

    [Default value]



    User name of the proxy server.

    [Value range]

    The user name contains 1 to 256 characters.


    Password of the proxy server.

    [Value range]

    The password contains 1 to 256 characters.


    If you enable this function, you do not need to set the user name and password of the proxy server.

    [Default value]


  4. Click OK.

    The Execution Result dialog box is displayed, indicating that the operation is successful.

  5. Click Close.
Updated: 2019-07-17

Document ID: EDOC1100067320

Views: 7416

Downloads: 25

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next