No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CloudBackup Feature Guide

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3, and Dorado18000 V3. It describes the implementation principles and application scenarios of the CloudBackup feature, and explains how to configure and manage CloudBackup.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying the Properties of a Repository

Modifying the Properties of a Repository

This operation allows you to modify the general properties of a repository.


A repository has been created on the storage system.


  1. Choose Data Protection > CloudBackup > Basic Settings > Repository.
  2. Select the desired repository and click Properties.

    The Properties of Repository dialog box is displayed.

  3. Modify the basic information listed in Table 3-7.

    Table 3-7 Repository parameters





    Name of the repository.

    [Value range]

    • The name must be unique.
    • The name contains 1 to 31 characters.
    • The name can contain only letters, digits, underscores (_), periods (.), hyphens (-), plus signs (+), and at signs (@).




    Description of the repository.

    [Value range]

    The description can be left blank or contain up to 255 characters.



    Full Quota

    Indicates whether to enable full quota. If full quota is enabled, the repository uses all the free capacity of the backup storage pool. If this is disabled, the repository capacity must be specified manually.




    Capacity of the repository.

    • This parameter is valid only when Full Quota is disabled.
    • The repository capacity cannot exceed the free capacity of the backup storage pool.
    • After modification, the repository capacity cannot be less than the used capacity.


    50 GB

    Alarm Threshold (%)

    Alarm threshold for the capacity of the repository. When the capacity usage of the repository exceeds this threshold, an alarm is generated, prompting you to expand the capacity or delete unneeded backup data to release storage space. If the alarm is not cleared, subsequent backup tasks may fail.

    [Value range]

    1 to 100



  4. Click OK.

    The Execution Result dialog box is displayed, indicating that the operation is successful.


    If you do not modify the properties of the repository, the Execution Result dialog box will not be displayed. The Properties of Repository dialog box is closed after you click OK.

  5. Click Close.
Updated: 2019-07-17

Document ID: EDOC1100067320

Views: 8673

Downloads: 25

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next