No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CloudBackup Feature Guide

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3, and Dorado18000 V3. It describes the implementation principles and application scenarios of the CloudBackup feature, and explains how to configure and manage CloudBackup.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Viewing Backup Plan Information

Viewing Backup Plan Information

You can check the information of a backup plan, including its basic information, protected LUNs or LUN consistency groups, backup tasks, and backup images.


A backup plan has been created on the storage system.


On the backup plan management page, you can:

  • Click Refresh to refresh the information about backup plans.
  • Enter a key word in the upper right corner to search for the desired backup plan.
  • Click on the right side of the list and select the desired parameters of a backup plan.


  1. Choose Data Protection > CloudBackup > Backup and Restoration > Backup Plan.
  2. View the basic information of the backup plan. Table 3-12 describes the parameters.

    Table 3-12 Backup plan parameters




    Name of the backup plan.


    ID of the backup plan.


    Status of the backup plan, which can be Active or Inactive.

    Offline Transmission

    Status of data transmission from the LUNs or LUN consistency groups to the Teleport device. This can be Enabled, Disabled, or Paused.

    Number of Backup Objects

    Number of LUNs and LUN consistency groups to be backed up in the backup plan.


    Repository where backup images generated by the plan are stored.

    Last Execution

    Last execution time of the backup plan.

  3. Select the backup plan and check its protected LUNs or LUN consistency groups, backup tasks, and backup images in the lower part of the page.
Updated: 2019-07-17

Document ID: EDOC1100067320

Views: 7571

Downloads: 25

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next