No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HyperClone Feature Guide for File

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado5000 V3, Dorado6000 V3, and Dorado18000 V3. It describes the implementation principles and application scenarios of the HyperClone feature (for file), and explains how to configure and manage HyperClone.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Viewing Clone File System Information

Viewing Clone File System Information

You can obtain basic information about a clone file system.

Procedure

  1. Choose Data Protection > Clone.
  2. Click the File System tab.
  3. In the left file system tree, select the parent file system of the clone file system you want to view.
  4. View basic information about all clone file systems under the parent file system. Table 2-3 describes related parameters.

    Table 2-3 Parameters of a clone file system

    Parameter

    Description

    Name

    Name of a clone file system.

    ID

    ID of a clone file system.

    Health Status

    Health status of a clone file system. The value is Normal, Faulty or Write protected.

    Running Status

    Running status of a clone file system. The value is Online, Offline or Partition migrating.

    Split Status

    Splitting status of a clone file system. The value can be:

    • Not started
    • Splitting
    • Queuing
    • Abnormal end

    If the splitting status is Abnormal end, refer to the alarm information for troubleshooting.

    Split Speed

    Splitting speed of a clone file system. The value can be:

    • Highest: The speed is normally above 200 MB/s. Splitting will be completed in the shortest period. This value is applicable when the service load is light.
    • High: The speed is normally from 100 MB/s to 200 MB/s. Splitting will be completed in the short period. This value is applicable when the service load is relatively light.
    • Medium: The speed is normally from 50 MB/s to 100 MB/s. Splitting will be completed in the long period. This value is applicable when the service load is relatively heavy.
    • Low: The speed is normally from 0 MB/s to 50 MB/s. Splitting will be completed in the longest period. This value is applicable when the service load is heavy.

    Parent File System Snapshot

    Snapshot used to create a clone file system.

Download
Updated: 2019-02-22

Document ID: EDOC1100067321

Views: 3033

Downloads: 7

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next