No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HyperClone Feature Guide for File

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado5000 V3, Dorado6000 V3, and Dorado18000 V3. It describes the implementation principles and application scenarios of the HyperClone feature (for file), and explains how to configure and manage HyperClone.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application Scenarios

Application Scenarios

HyperClone for file can be quickly deployed and occupies small storage space occupation. Source data read/write will not be affected and multiple file system copies can be created. Therefore, this feature can be used independently or together with other features in scenarios such as application testing and data analysis, DR tests, and IT operation and maintenance (O&M).

Application Testing and Data Analysis

Application testing refers to the testing of a software system's functions, performance, security, and availability. Data analysis is the process of researching a great amount of data and extracting useful information to provide support for decision making. Both application testing and data analysis involve heavy data reads/writes. Clone file systems provide the same data as the parent file systems at the point in time when clone was performed. Reading data from the clone file systems can prevent impact on the production system. Figure 1-4 illustrates the process.

Figure 1-4 Using clone file systems for application testing and data analysis

DR Tests

HyperClone for file can work with HyperReplication or HyperMetro to clone the file systems in the DR center. The clone file systems can be used for DR testing to confirm data availability in the DR center. Reading and modifying data in the clone file systems will not affect data in the production and DR systems.

Figure 1-5 Using HyperClone with HyperReplication for DR tests

IT O&M

You can create multiple clones for a file system at a point in time for IT O&M, such as production reports and data tests. Figure 1-6 shows the scenario.

Figure 1-6 Using clone file systems for IT O&M
Download
Updated: 2019-02-22

Document ID: EDOC1100067321

Views: 2993

Downloads: 7

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next