No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HyperClone Feature Guide for File

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado5000 V3, Dorado6000 V3, and Dorado18000 V3. It describes the implementation principles and application scenarios of the HyperClone feature (for file), and explains how to configure and manage HyperClone.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Stopping Splitting a Clone File System

Stopping Splitting a Clone File System

If services are not running properly after clone file system splitting is started, you can stop the splitting any time to relieve the load on the storage system.

Prerequisites

You can stop splitting a clone file system when the following conditions are met: Health Status and Running Status of the clone file system are Normal and Online respectively, and Split Status of the clone file system is Queuing, Splitting or Abnormal end.

Procedure

  1. Choose Data Protection > Clone.
  2. Click the File System tab.
  3. Select a clone file system you want to stop splitting.

    1. In the left file system tree, select the parent file system of the clone file system you want to stop splitting.
    2. On the right, select the clone file system you want to stop splitting.
    NOTE:

    In a storage system, you can concurrently stop splitting multiple clone file systems.

  4. Stop splitting the clone file system.

    1. Click Stop Split.
      NOTE:

      You can also right-click the clone file system and choose Stop Split from the shortcut menu.

      The Execution Result dialog box is displayed, indicating that the operation is successful.

    2. Click Close.

Download
Updated: 2019-02-22

Document ID: EDOC1100067321

Views: 2967

Downloads: 7

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next