No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HyperVault Feature Guide

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado5000 V3, Dorado6000 V3, and Dorado18000 V3. It describes the implementation principles and application scenarios of the HyperVault feature, and explains how to configure and manage HyperVault.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Viewing the General Properties of a Remote Fibre Channel Link

Viewing the General Properties of a Remote Fibre Channel Link

This operation enables you to check whether Fibre Channel links are available between the local and remote storage devices.

Prerequisites

There is a remote storage device and a Fibre Channel link has been set up between it and the local storage device.

Procedure

  1. Choose Data Protection > Remote Device.
  2. Select a remote device that you want to view and click the FC Link tab in the lower area.
  3. Select the Fibre Channel link that you want to view and click Properties.

    The Properties of Link dialog box is displayed.

    NOTE:

    You can also right-click the link and choose Properties from the shortcut menu.

  4. On the General tab, view the general properties of the remote Fibre Channel link.

    Table 3-1 describes the parameters.
    Table 3-1 General properties of the remote Fibre Channel link

    Parameter

    Description

    Value

    Type

    Type of a remote link.

    [Example]

    FC

    Link ID

    ID of a remote link.

    [Example]

    3

    Health Status

    Health status of a remote link.

    [Example]

    Normal

    Running Status

    Running status of a remote link.

    [Example]

    Connected

    Local Controller

    Owning controller of the local storage device.

    [Example]

    0A

    Local Port

    Fibre Channel port on the local device.

    [Example]

    CET0.A.A1.P1

    Remote Controller

    Owning controller of the remote storage device.

    NOTE:

    This parameter is valid if the Device Type of the remote device is Replication.

    [Example]

    0B

    Remote Port

    Fibre Channel port on the remote device.

    NOTE:

    This parameter is valid if the Device Type of the remote device is Replication.

    [Example]

    CET0.A.A1.P1

    Local Port WWPN

    Unique identifier of the local Fibre Channel port.

    [Example]

    21000022a105a50e

    Remote Port WWPN

    Unique identifier of the remote Fibre Channel port.

    [Example]

    21000022a104def6

Download
Updated: 2019-02-22

Document ID: EDOC1100067325

Views: 2603

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next