No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


HyperVault Feature Guide

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado5000 V3, Dorado6000 V3, and Dorado18000 V3. It describes the implementation principles and application scenarios of the HyperVault feature, and explains how to configure and manage HyperVault.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying the Advanced Properties of a Remote Link

Modifying the Advanced Properties of a Remote Link

This operation enables you to modify the bandwidth and bandwidth usage of a link.


  • The system has a normal remote link.
  • The Device Type of the remote device to which the remote link connects is Replication.


The remote link is either a Fibre Channel or an iSCSI link.


  1. Choose Data Protection > Remote Device.
  2. Select a remote device. On the FC Link or iSCSI Link tab in the lower pane, select the link you want to modify and click Properties.

    The Properties of Link dialog box is displayed.


    You can also right-click the link and choose Properties from the shortcut menu.

  3. Modify the advanced properties of the remote link.

    1. Click Advanced.
    2. Select Set bandwidth and set the advanced properties for the remote link.

      Table 5-3 describes the parameters.

      Table 5-3 Advanced properties for a remote link





      Maximum data transfer rate of a link.


      100 Mbit/s

      Bandwidth Usage (%)

      Usage of the link bandwidth.



  4. Confirm the modification of the advanced properties.

    1. Click OK.

      The security alert dialog box is displayed.

    2. Confirm the information in the dialog box and select I have read and understand the consequences associated with performing this operation.
    3. Click OK.

      The Execution Result dialog box is displayed, indicating that the operation succeeded.

    4. Click Close.

Updated: 2019-02-22

Document ID: EDOC1100067325

Views: 2280

Downloads: 13

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next