No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0.0 SystemReporter User Guide

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to SystemReporter

Logging In to SystemReporter

This section describes how to log in to SystemReporter.

Prerequisites

  • SystemReporter has been installed and its services have been enabled.
  • The browser meets compatible requirements.
  • The user name and password for logging in to SystemReporter have been obtained.

Context

This section uses Chrome 27 in Windows as an example to explain how to log in to SystemReporter.

Procedure

  1. Open a web browser on your maintenance terminal.
  2. In the address box of the browser, type https://XXX.XXX.XXX.XXX:port number, and press Enter.

    The login page of SystemReporter is displayed.

    NOTE:
    • XXX.XXX.XXX.XXX is the IP address of the server on which SystemReporter is installed.
    • port number indicates the HTTPS service port. The default port number is 8088. If an HTTPS service port is manually specified during the installation, use the specified port to log in to SystemReporter.

  3. Enter the login information described in Table 3-2.



    Table 3-2  Login information

    Parameter

    Description

    Value

    Language

    Language for using SystemReporter. Simplified Chinese and English are supported.

    [Example]

    English

    Username

    User name for logging in to SystemReporter.

    [Value]

    • The user name must contain at least eight characters.
    • The user name contains only digits, letters, periods (.), underscores (_), or hyphens (-) and must start with a letter or underscore (_).

    [Default value]

    admin

    Password

    Password for logging in to SystemReporter.

    [Value]

    • The password must contain at least eight characters.
    • The password must contain special characters, upper-case letters, lower-case letters, and digits.
    • Special characters can be spaces and `~!@#$%^&*()-_=+\|[{}];:'",<.>/?

    [Default value]

    The default user name is admin and the initial password is Admin@storage.

    Verification code

    Verification information displayed in SystemReporter.

    NOTE:
    The system prompts you to enter the verification code if you enter incorrect user names and passwords for two consecutive times.

    The verification code comprises four valid digits.

  4. Click Login.

    The Change Password dialog box is displayed.

  5. In the Change Password dialog box that is displayed, enter the original password and new password and click OK.

    The Success dialog box is displayed indicating that the password is changed successfully.

    NOTE:
    • If you log in to SystemReporter for the first time, the system will prompt you to change your password. If you have ever logged in to SystemReporter and want to change the password, click in the logout and help area.
    • If an administrator or read-only user forgets its password, contact the super administrator to reset the password. If you forget the user name or password of the super administrator, contact Huawei technical engineers.
    • If you consecutively input incorrect passwords for more times than that specified in the login policy, the system automatically locks your account for a specified period and unlocks it after this period.
    • You can configure the password policy. For details, see Configuring Security Policy.

Follow-up Procedure

If you want to log out of SystemReporter, perform the following operations:

  1. On the menu bar, click .

    The Info dialog box is displayed.

  2. Click OK. The SystemReporter user logs out.
Translation
Download
Updated: 2019-02-26

Document ID: EDOC1100067885

Views: 2259

Downloads: 0

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next