No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0.0 SystemReporter User Guide

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Registering a Device

Registering a Device

This section describes how to register a device with SystemReporter to monitor the device's running status.

Prerequisites

  • The IP address of the device that you want to register has been obtained.
  • The user name and account of an administrator, super administrator, or device administrator of the storage system have been obtained. The resource administrator or read-only user cannot be used to register the device.
  • The registered devices are less than two sets.
  • The SystemReporter server's access to ports 8088, 8080, and 22 of storage arrays must be ensured. Otherwise, the SystemReporter server may fail to connect to storage arrays.

Procedure

  1. Go to the dialog box for registering a device.
    1. In the main menu area, click System.
    2. In the left navigation tree, choose System Configuration > Registration and Configuration.
    3. In the right function pane, click Register Device.

      The Register Device dialog box is displayed.

    NOTE:

    A maximum of two storage devices can be registered with the SystemReporter system by default.

  2. Register a device.

    When you register devices of earlier versions with SystemReporter, it communicates with the devices using TLS 1.0. There may be security risks.

    1. Set basic information about the device, as described in Table 3-3.



      Table 3-3  Basic device parameters

      Parameter

      Description

      Setting

      IP address

      IP address of a storage system management port.

      [Value range]

      Support IPv4 address and IPv6 address

      [Example]

      192.168.1.100

      Username

      Super administrator, administrator, and device administrator.

      NOTE:
      A device administrator can register a device but has no permission to view directories of a registered device.

      [Example]

      admin

      Password

      Password of a storage system administrator or super administrator.

      [Example]

      Admin@storage

      Pulic Key

      After Public Key is selected, you need to import a private key file and enter the password.
      NOTE:
      • To import a private key file, click Browse behind User Key.
      • When you use a public key for authentication, SystemReporter will save the private ket on the service as a device authentication credential.

      [Example]

    2. Click OK.

      The Success dialog box is displayed, indicating that the registration request succeeds.

      NOTE:
      If an alarm indicating that the device has an untrusted security certificate is reported, follow instructions in the Security Configuration Guide of the corresponding version to configure a trusted certificate.

    3. Click OK.

      When the status of the device displays as Registration Succeeded in the function pane, the device is registered successfully.

Follow-up Procedure

After the device is registered, you can perform the operation described in Table 3-4.

Table 3-4  Subsequent operations

Operation

Procedure

Description

Deregistering a device

Select a registered device, and click Deregister Device.

You can deregister the device.

NOTE:
This operation cannot be performed for devices being registered, that is, the devices whose status is synchronizing or registering.

Modifying the registration information

Select a registered device, and click Modify Registration Information.

You can modify information of the registered device.

Translation
Download
Updated: 2019-02-26

Document ID: EDOC1100067885

Views: 2125

Downloads: 0

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next