No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0.0 SystemReporter User Guide

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Alarm Notification

Configuring Alarm Notification

By configuring alarm notification, you can obtain performance alarm notifications of storage systems and SystemReporter through emails or short messages, and identify alarms of each type of severity through different alarm notification sounds.

Prerequisites

  • Alarm thresholds have been configured for the registered device.
  • Before configuring a mailbox and sending alarm notification short messages, you need to configure a notification server.

Context

If a storage system or SystemReporter encounters a fault, an alarm is sent to you. Then you must clear the alarm in time to ensure normal running of the storage system or SystemReporter. You are notified in two modes:
  • Remote notification: You are notified through an email or short message.
  • Sound notification: You can identify alarms of each type of severity through different sounds.

Procedure

  1. On the menu bar, choose Alarms.
  2. Configure remote alarm notification.
    1. In the navigation tree, choose Alarm Notification > Remote Notification.
    2. In the function pane, click Create.

      The Create Notification Rule dialog box is displayed.

    3. On the Set Basic Information tab of the Create Notification Rule dialog box, configure basic information. For details about related parameter values, see Table 5-9. Click Next.

      The Select Resources page is displayed.

      Table 5-9  Parameters of a notification rule

      Parameter

      Description

      Name

      Name of the notification rule.
      NOTE:

      The name contains digits, letters, underscores (_), and hyphens (-). It must start with a letter or underscore (_).

      Status

      Status of the notification rule: Enabled or Disabled.

      Start time

      Time when the notification rule is enabled.

      End time

      Time when the notification rule is disabled. If Always Run is selected, the end time is not restricted.

      Sending language

      Language in which notifications are sent: The value can be Simplified Chinese or English.

      Sending contents

      Content contained in a notification: Severity, Name, Type, Source, Occurred at, Clear Status, and Description.

      Description

      Description of the notification rule.

    4. On the Select Resources page, select the resource whose alarms that you want to send to users and click Next.

      The Select Alarms page is displayed.

      NOTE:
      • The following are two types of resources:
        • Storage system: You can select a certain storage system from SystemReporter to create performance alarms for the storage system.
        • Management system: You can select the management system from SystemReporter to create performance alarms for SystemReporter.
      • You can search for a certain device resource by Name or IP address.

    5. On the Select Alarms page, select an alarm that you want to notify users and click Next.

      The Enter the Recipient's Contact Information page is displayed.

      NOTE:
      In the upper right corner of this page, you can select an alarm severity to search for alarms by severity.

    6. On the Enter the Recipient's Contact Information page, configure the phone number and email address for receiving alarms.

      • Short message notification: After Phone, enter country code + phone number (for example, 8613612345678 or +8613612345678) and Remarks. Then click to add the phone number to the phone number list.
      • Email notification:

        Configure Email and Remarks, and click to add the email address to the email address list.

    7. Click Finish.

      The Success dialog box is displayed.

    8. Click OK.

      The notification rule is successfully created.

  3. Configure sound notification.
    1. In the navigation tree, choose Alarm Notification > Audible Notification.
    2. In the function pane, click Modify.

      The Modify Alarm Sound dialog box is displayed.

    3. Select Enabled before the alarm sound that you want to configure.

      NOTE:

      You can modify sounds of alarms whose severity types are Critical, Major, Warning, and Info.

    4. In Type, select a desired sound type for alarms.

      NOTE:
      • There are two types of alarm sounds: Minor and Cyclic.
      • You can click to test the alarm sound.
      • If you want to restore sound settings, click Restore Defaults.

    5. Click OK.

      The Success dialog box is displayed.

    6. Click OK.

Follow-up Procedure

In the remote notification rule list, click a notification rule to view details. You can also perform the following operations:
  • Modifying basic information or alarm receiver of the notification rule
  • Adding or deleting a resource or alarm
  • Enabling, disabling, or deleting a notification rule
Translation
Download
Updated: 2019-02-26

Document ID: EDOC1100067885

Views: 2139

Downloads: 0

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next