No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 9000 V5 7.0.0 SystemReporter Upgrade Guide

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Upgrading the SystemReporter

Upgrading the SystemReporter

This chapter describes the method for upgrading the SystemReporter.

  1. Decompress SystemReporter of the latest version. Go to the decompressed directory. Locate the script and then run the sh command.

  2. Type y when prompted to confirm upgrade operations, shut down SystemReporter, and start the upgrade.

  3. After the upgrade is successfully performed, you can start SystemReporter immediately.
  4. If you type y, the following result will be displayed, as shown in the following figure. If you type n, you can go to installation directory/Runtime of SystemReporter. You can run sh to start the SystemReporter service.

Updated: 2019-02-26

Document ID: EDOC1100067899

Views: 1353

Downloads: 0

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next