No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change iprule_switch

change iprule_switch

Function

The change iprule_switch command is used to modify the switch status for the created ip rules.

Format

change iprule_switch < is_enable >

Parameters

Parameter

Description

Value

is_enable IP rule switch.

enable: enable the function.

disable: disable the function.

Level

Super administrator

Usage Guidelines

None

Example

Modify the switch status for the created ip rules.

admin:/>change iprule_switch enable
Command executed successfully.
 

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 25025

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next