No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show view_directory_only switch

show view_directory_only switch

Function

The show view_directory_only switch command is used to check the state of the file filtering switch. When the switch is "ON", users can browse only directories.

Format

show view_directory_only switch

Parameters

None

Level

Administrator

Usage Guidelines

  • The show view_directory_only switch command is used to check the status of the file filtering switch. When the switch is "ON", users can browse only directories on DeviceManager and the CLI.
  • Read-only users can also run this command to view information.

Example

Check the state of the file filtering switch.

admin:/>show view_directory_only switch
 
  switch_status
  -------------
  ON

System Response

The following table describes the parameter meanings.

Parameter

Meaning

switch_status

Switch state. The value is "ON" or "OFF".

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24618

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next