No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show external dns

show external dns

Function

The show external dns command is used to query external domain name server (DNS) information.

Format

show external dns

Parameters

None

Level

Device administrator

Usage Guidelines

None

Example

Query external domain name server information.

admin:/>show external dns
 
  address                        targetType  
  -----------------------------  ----------  
  192.168.100.10,192.168.100.11  1,2

System Response

The following table describes the parameter meanings.

Parameter

Meaning

address

External DNS IP address.

targetType

Network type of the external DNS service. The front-end network is "1", and the management network is "2".

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 25348

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next