No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show worm_softclock

show worm_softclock

Function

The show worm_softclock command is used to query the WORM soft clock.

Format

show worm_softclock

Parameters

None

Level

Administrator

Usage Guidelines

Read-only users can also use this command.

Example

Query the WORM soft clock.

admin:/>show worm_softclock 
 
  Clock Time : 2014-06-12/13:00:00 +08:00

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Clock Time

Time of the WORM soft clock in the system.

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24756

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next