No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
stop task

stop task

Function

The stop task command is used to stop a task.

Format

stop task < task_id >

Parameters

Parameter

Description

Value

task_id Task ID.

The value is a combination of numbers, letters, underscores (_), and periods (.) and is 1 to 127 characters in length.

Level

Administrator

Usage Guidelines

  • This command is used to stop a task that already exists in the system. Whether the task can be stopped depends on its type. All types of tasks can be configured on the CLI.
  • The command prompt varies depending on the task type.

Example

Stop a task.

admin:/>stop task 9223372036854775809 
WARNING: You are about to stop Data scrubing.
Have you read warning message carefully?(y/n)y
 
Are you sure you want to perform the operation?(y/n)y
Command executed successfully.

System Response

None

Download
Updated: 2019-07-25

Document ID: EDOC1100067955

Views: 27537

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next