No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change system manage_ip

change system manage_ip

Function

The change system manage_ip command is used to modify the management IP address of a cluster system.

Format

change system manage_ip [Cluster_ManageIpv4=?] [Cluster_ManageIpv4GateWay=?] [Cluster_ManageIpv4Mask=?] [Cluster_Poe_ManageIpv4=?] [Cluster_ManageIpv6=?] [Cluster_ManageIpv6GateWay=?] [Cluster_ManageIpv6Prefix=?] [Cluster_Poe_ManageIpv6=?] [Cluster_Poe_BUSIpv4=?] [Cluster_Poe_BUSIpv6=?]

Parameters

Parameter

Description

Value

Cluster_ManageIpv4 Cluster Manage Ipv4 address.

The value is a character string in the format of an IPv4 address.

Cluster_ManageIpv4GateWay IPv4 Cluster Manage Gateway.

The value is a character string in the format of an IPv4 address.

Cluster_ManageIpv4Mask IPv4 Cluster Manage Mask.

The value is a character string in the format of a mask.

Cluster_Poe_ManageIpv4 Cluster Provisioning Orchestration Engine Manage Ipv4 address.

The value is a character string in the format of an IPv4 address.

Cluster_ManageIpv6 Cluster Manage Ipv6 address.

The value is a character string in the format of an IPv6 address.

Cluster_ManageIpv6GateWay IPv6 Cluster Manage Gateway.

The value is a character string in the format of an IPv6 address.

Cluster_ManageIpv6Prefix IPv6 Cluster Manage Prefix.

The value is an integer ranging from 1 to 128.

Cluster_Poe_ManageIpv6 Cluster Provisioning Orchestration Engine Manage Ipv6 address.

The value is a character string in the format of an IPv6 address.

Cluster_Poe_BUSIpv4 Cluster Provisioning Orchestration Engine Business Ipv4 address.

The value is a character string in the format of an IPv4 address.

Cluster_Poe_BUSIpv6 Cluster Provisioning Orchestration Engine Business Ipv6 address.

The value is a character string in the format of an IPv6 address.

Level

Device administrator

Usage Guidelines

If the subnet is not changed, you must specify at least one parameter among the four optional parameters.

If the subnet is changed and Provisioning Orchestration Engine management IP address does not need to be configured, you must specify Cluster_ManageGateWay, Cluster_ManageIps and Cluster_ManageMask at the same time.

Example

Run the change system manage_ip command to modify the management IP address of a cluster system.

admin:/>change system manage_ip Cluster_ManageIpv4=192.168.203.179
WARNING: You are about to set the management IP address of the system. This operation will restart the sshd service.
Have you read warning message carefully?(y/n)y
 
Are you sure you want to perform the operation?(y/n)y
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24968

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next