No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show event

show event

Function

The show event command is used to query historical alarms.

Format

show event < alarm_sequence > < alarm_count >

Parameters

Parameter

Description

Value

alarm_sequence Alarm serial number.

The value is an integer ranging from 0 to 4294967295.

alarm_count Number of alarms that you want to query.

The value is an integer ranging from 1 to 100.

Level

Read-only user

Usage Guidelines

The super administrator (admin) can view all operation logs. Other administrators can only view their own operation logs.

Example

Query historical alarms.

admin:/>show event 1 2 
 
  type           : event                       
  id             : 17665201143809              
  level          : informational               
  sequence       : 1                            
  time           : 2013-09-16/11:46:46 +08:00 
  clear_time     : --                          
  recovery_time  : --                          
  clear_userName :                            
  parameter      : f27dong,zhch3012,B3012,3,210235G78PZ0C8000017,0,210235G73PZ0C7000077         
  name           : A disk was inserted        
  description    : A disk was inserted into slot (0) of device (zhch3012). The capacity of the service system may be increased. 
                 Location: storage cluster (f27dong), rack (B3012), enclosure(3), device-SN(210235G78PZ0C8000017),  
                 disk (210235G73PZ0C7000077) 
                 Possible reasons: 
                 A disk was inserted.  
  suggestion     : Step1: None.             
-------------------------------------------------------------------------------------------------------------------------------- 
  type           : event                         
  id             : 17665201143809              
  level          : informational                
  sequence       : 2                             
  time           : 2013-09-16/11:46:47 +08:00  
  clear_time     : --                           
  recovery_time  : --                          
  clear_userName :                              
  parameter      : f27dong,zhch3012,B3012,3,210235G78PZ0C8000017,2,210235G73PZ0C7000074         
  name           : A disk was inserted          
  description    : A disk was inserted into slot (2) of device (zhch3012). The capacity of the service system may be increased. 
                 Location: storage cluster (f27dong), rack (B3012), enclosure(3), device-SN(210235G78PZ0C8000017),  
                 disk (210235G73PZ0C7000074) 
                 Possible reasons: 
                 A disk was inserted.  
  suggestion     : Step1: None.

System Response

The following table describes the parameter meanings.

Parameter

Meaning

type

Alarm type.

id

Alarm ID.

level

Alarm severity.

sequence

Alarm SN.

time

Time when the alarm occurs.

clear_time

Time when the alarm is cleared.

recovery_time

Time when the alarm is recovered.

clear_userName

User name that clears the alarm.

parameter

Alarm parameter.

name

Alarm name.

description

Alarm description.

suggestion

Alarm recovery suggestion.

Download
Updated: 2019-07-25

Document ID: EDOC1100067955

Views: 27633

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next