No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create system user

create system user


The create system user command is used to create a system user.


create system user < name > < level > [ description ]





name User name.

The value can contain only 8 to 32 letters, digits, and periods underscores (_), must start with a letter. and cannot contain the following characters: "/\[]:;|=,+*?<>@ or space. The value cannot end with a period (.).

level User level.

admin: Administrator. An administrator can manage systems, racks, devices, and alarms and change its own password but cannot manage users.

readonly: Read-only user. A read-only user can only check information and change its own password.

resource_admin: Resource administrator. A resource administrator can manage systems and alarms and change its own password but cannot manage users.

device_admin: Device administrator. A device administrator can manage racks, devices, and alarms and change its own password but cannot manage users.

description User description.

The value contains 1 to 255 characters.

password User password.

The value contains 8 to 32 characters. The password cannot be the same as the user name or the reverse of the user name. Its length and complexity depend on users' security policies, see to change system user safe_strategy.


Super administrator

Usage Guidelines

When the system is installed, the unique super administrator admin is automatically generated. The default password is Admin@storage. The super administrator has the highest rights and cannot be created by the system.


1. If you start data encryption when the system is installed, the system will automatically generate a super administrator, the username is securityAdmin, the default password is securityAdmin@storage.

2. You must change the default password of default account upon delivery of the system to reduce potential security risks. You are advised to periodically change the password.


Create a system user.

admin:/>create system user test1234 admin 
Please input your password:******** 
Please input your password again:******** 
Command executed successfully.

System Response


Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 25295

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next