No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show domain ldap

show domain ldap

Function

The show domain ldap command is used to query Lightweight Directory Access Protocol (LDAP) domain information.

Format

show domain ldap

Parameters

None

Level

Device administrator

Usage Guidelines

None

Example

Query Lightweight Directory Access Protocol domain information.

admin:/>show domain ldap
 
  serverIP        : 10.40.25.8        
  port            : 389                  
  transferType    : LDAP                 
  bindDN          : cn=user2,ou=u,dc=company,dc=com                      
  userSearchPath  : ou=u,dc=company,dc=com 
  groupSearchPath : ou=g,dc=company,dc=com 
  baseDN          : dc=company,dc=com
  bindLevel       : simple
  bindUsingADCred : true
  netgroup DN     : 
  userSearchScope : subtree
  groupSearchScope : subtree
  netgroupSearchScope : subtree
  timelimit       : 3
  bindTimelimit   : 3
  idleTimelimit   : 30

System Response

The following table describes the parameter meanings.

Parameter

Meaning

serverIP

LDAP server IP address.

port

LDAP server port.

transferType

Bottom-layer communication protocol type.

bindDN

Binding directory for authenticating the query of data in LDAP.

userSearchPath

LDAP directory where user information resides.

groupSearchPath

LDAP directory where user group information resides.

baseDN

Start directory for querying data in LDAP.

bindLevel

Way of binding the storage array with the LDAP server.

bindLevel

Way of binding the storage array with the LDAP server.

bindLevel

Way of binding the storage array with the LDAP server.

bindLevel

Way of binding the storage array with the LDAP server.

bindLevel

Way of binding the storage array with the LDAP server.

bindUsingADCred

Whether to use the AD domain account to bind.

netgroup DN

Filter criteria for querying netgroups. If this parameter is not configured, the querying starts from the root directory.

userSearchScope

Range for querying the user.

groupSearchScope

Range for querying the group.

netgroupSearchScope

Range for querying the netgroup.

timelimit

Timeout length that the client waits for the service end to return the query result (if the timeout length is not configured, the length is three seconds by default).

bindTimelimit

Timeout length that the client establishes a connection with a service end (if the timeout length is not configured, the length is three seconds by default).

idleTimelimit

Timeout length that the client is disconnected when the LDAP connection is free (if the timeout length is not configured, the length is 30 seconds by default).

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24481

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next