No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change domain nis

change domain nis

Function

The change domain nis command is used to modify information about a network information service (NIS) domain. NIS servers can be used to manage accounts on a network.

Format

change domain nis < nis_domain > < nis_server >

Parameters

Parameter

Description

Value

nis_domain NIS domain name.

Domain string using alphanumeric and -(hyphen) in one section and .(dot) between different sections. Section length is from 1 to 63 and total string length is from 1 to 63 and the first and last character can not be '-'.

nis_server NIS server address

The value is a character string in IP address format. If there are multiple IP addresses, separate them with commas (,).

Level

Device administrator

Usage Guidelines

None

Example

Manage accounts on a network.

admin:/>change domain nis uawei.com 192.168.60.11,192.168.60.12
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24659

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next