No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show client general

show client general

Function

The show client general command is used to query client information.

Format

show client general [ id=? ] [ client_type=? ] [ node_id=? ]

Parameters

Parameter

Description

Value

id Client ID.

The value can contain only 1 to 127 letters, digits, hyphens (-), underscores (_), and periods (.).

client_type Client type.
  • NFS: Network File System (NFS) client.
  • CIFS: Common Internet File System (CIFS) client.
  • FTP: File Transfer Protocol(FTP) client.
node_id Node ID.

The value can contain only 1 to 127 letters, digits, hyphens (-), underscores (_), and periods (.).

Level

Device administrator

Usage Guidelines

  • Run the show client general [ id=? ] [ client_type=? ] [ node_id=? ] command to query information about a specified client.
  • Run the show client general command to query information about all clients in the system.
  • Read-only users can also run this command to view information.

Example

Query client information.

admin:/>show client general client_type=nfs 
 
  ID                ClientType  NodeID  IP             
  ----------------  ----------  ------  ------------   
  7690162811353000  NFS         7690    192.168.10.122

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

Node ID.

ClientType

Client type.

NodeID

ID of the node where the client resides.

IP

IP address.

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24970

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next