No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change snmp v1v2c_status

change snmp v1v2c_status

Function

The change snmp v1v2c_status command is used to enable or disable the snmp v1&v2c protocol service.

Format

change snmp v1v2c_status <status>

Parameters

Parameter

Description

Value

status The status of snmp v1&v2c protocol service.

enable: Enable the snmp v1&v2c service.

disable: Disable the snmp v1&v2c service.

Level

Administrator

Usage Guidelines

None

Example

Enable snmp v1&v2c protocol.

admin:/>change snmp v1v2c_status enable
CAUTION: The SNMP V1/V2 is not security, we recommend to use SNMP V3.
Do you wish to continue?(y/n)y
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 25245

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next