No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
clear infoequalizer node external_ip

clear infoequalizer node external_ip


The clear infoequalizer node external_ip command is used to clear the external ip of a node.


clear infoequalizer node external_IP < id >





id ID of a node in a protocol cluster.

The value contains <node_id>_<zone_name> with node_id using 1 to 127 digits and zone_name string using alphanumeric, _(underscore), .(dot) , or -(hyphen)(length is from 3 to 80).The first zone_name character must be alphabet, and the last zone_name character can not be .-_.., press Ctrl+A to view available list.


Device administrator

Usage Guidelines



Clear the external ip of a node.

admin:/>clear infoequalizer node external_IP 5641_zone6
WARNING: You are about to modify the IP address. Modifying the IP address may disconnect the NAS client. Before performing this operation, verify that no client is connected to the IP address.
Have you read warning message carefully?(y/n)y
Are you sure you want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24230

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next