No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change camera password

change camera password

Function

The change camera password command is used to change the user name and the password of a camera.

Format

change camera password <camera_id> <camera_protocol> <user_name>

change camera password <camera_id> <camera_protocol> <passwd_rule> <user_name>

Parameters

Parameter

Description

Value

cmaera_id Camera ID.

The value is a string of 1 to 20 characters excluding the slash (/) and cannot be a period (.) or two periods (..). \s indicates a space, \| indicates |, \q indicates ?, and \\ indicates \.

camera_protocol Camera protocol.

standard: Standard Protocol

hikvision: Hikvision SDK

dahua: Dahua SDK.

passwd_rule Password rule.

inner: Internal rules must be complied with (the length complies with the value set in the security policy, that is, 8 to 64 characters). The password must contain at least two types of the following characters: Uppercase letters, lowercase letters, and digits. The value cannot be the same as or reverse of the user name. A maximum of three consecutive repeated characters are allowed. outer: External rules must be complied with (1 to 64 characters).

user_name Camera user name.

The value is a string of 1 to 64 characters. \s indicates a space, \| indicates |, \q indicates ?, and \\ indicates \.

password Camera password.

Character string (checking the password validity based on the password rule).

old_password Old password of the camera.

The old password is used to check whether the password of the camera is the same as that in the database.

Level

Resource administrator

Usage Guidelines

You can run the change camera password command to change the user name and the password of a camera.

Example

  • Change the password of a camera that uses the SDK protocol.

    admin:/>change camera password camera002 hikvision username
    Please enter your new password:******
    Please enter your new password again:******
    CAUTION: You are about to modify the password parameter. If the parameter settings are incorrect, image data may fail to be received.
    Suggestion: Ensure that the configured password is the same as that of the camera .
    Do you wish to continue?(y/n)y
    Command executed successfully.
     
  • Change the protocol type of a camera from SDK to standard, and setting the authentication mode to Needless.

    admin:/>change camera password camera001 standard outer username
    Please enter your old password:******
    Please enter your new password:******
    Please enter your new password again:******
    CAUTION: You are about to modify the password parameter. If the parameter settings are incorrect, image data may fail to be received.
    Suggestion: Ensure that the configured password is the same as that of the camera .
    Do you wish to continue?(y/n)y
    Command executed successfully.
     

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24703

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next