No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show node capacity

show node capacity

Function

The show node capacity command is used to query node capacity information.

Format

show node capacity [ id ]

Parameters

Parameter

Description

Value

id Node ID (unique).

The value can contain only 1 to 127 letters, digits, hyphens (-), underscores (_), and periods (.).

Level

Read-only user

Usage Guidelines

  • Run the show node capacity [id] command to query the capacity of a specified node.
  • Run the show node capacity command to query the capacities of all nodes in the system.

Example

Query node capacity information.

admin:/>show node capacity 
 
  ID    Name  Node Capacity  Node Used Capacity 
  ----  ----  -------------  ------------------ 
  8266  74    2.171TB        0.000MB 
  8267  75    2.443TB        0.000MB 
  8268  76    0.000MB        0.000MB

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

Node ID.

Name

Node name.

Node Capacity

Total capacity of the node.

Node Used Capacity

Used capacity of the node.

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 25033

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next