No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change system root_password

change system root_password

Function

The change system root_password command is used to change the password of user root on a node.

Format

change system root_password < node_id >

Parameters

Parameter

Description

Value

node_id Node ID.

The value can only contain 1 to 127 digits.

You can press "Ctrl+A" to view the available values of "node_id".

old password Password of user root.

Password of user root.

new password New password of user root.

The value contains 8 to 16 letters and must contain special characters and any two character types of digits, uppercase, and lowercase characters. The value must be different from the user name or mirror writing of the user name. The password cannot be the same as the last five passwords set previously. The password can contain special characters that do not need to be escaped. Special characters include `~!@#$%^&*()-_=+|[{}];:'\",<.>/? and spaces.

Level

Super administrator

Usage Guidelines

Run the change system root_password <node_id> command to change the password of user root on a specified node.

Example

Change the password of user root on a node.

admin:/>change system root_password 7175
Please enter your old password::*************
Please enter your new password:*************
Please enter your new password again:*************
WARNING: You are about to change account root's password of the operating system node. The new password will take effect upon the next login.
Have you read warning message carefully?(y/n)y
 
Are you sure you want to perform the operation?(y/n)y
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24894

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next