No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show object_storage_compatible_s3_service

show object_storage_compatible_s3_service

Function

The show object_storage_compatible_s3_service command is used to query the status of the object storage service that is compatible with Amazon S3 interfaces.

Format

show object_storage_compatible_s3_service <object>

Parameters

Parameter

Description

Value

object The query object.

http: HTTP switch of the Object Storage Service Controller and Provisioning Orchestration Engine.

sha1: SHA1 switch of the Object Storage Service Controller and Provisioning Orchestration Engine.

tls: The earliest version of TLS supported by the Object Storage Service Controller and Provisioning Orchestration Engine.

Level

Device administrator

Usage Guidelines

None

Example

Query the Provisioning Orchestration Engine and Object Storage Service Controller status of HTTP, SHA1 and the earliest version of TLS in the object storage service that is compatible with Amazon S3 interfaces.

admin:/>show object_storage_compatible_s3_service tls
 
  ServicePoeVersion : tlsv1.0        
  ServiceOscVersion : tlsv1.0  
 

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ServicePoeVersion

The earliest version of TLS supported by the Provisioning Orchestration Engine service.

tlsv1.0: tls version 1.0.

tlsv1.1: tls version 1.1.

tlsv1.2: tls version 1.2.

ServiceOscVersion

The earliest version of TLS supported by the Object Storage Service Controller service.

tlsv1.0: tls version 1.0.

tlsv1.1: tls version 1.1.

tlsv1.2: tls version 1.2.

HTTP switch status of the Object Storage Service Controller

HTTP switch status of the Object Storage Service Controller.

enable: The switch is turned on.

disable: The switch is turned on off.

unknown: The status of the switch is unknown.

HTTP switch status of the Provisioning Orchestration Engine

HTTP switch status of the Provisioning Orchestration Engine.

enable: The switch is turned on.

disable: The switch is turned on off.

unknown: The status of the switch is unknown.

SHA1 switch status of the Object Storage Service Controller

SHA1 switch status of the Object Storage Service Controller.

enable: The switch is turned on.

disable: The switch is turned on off.

unknown: The status of the switch is unknown.

SHA1 switch status of the Provisioning Orchestration Engine

SHA1 switch status of the Provisioning Orchestration Engine.

enable: The switch is turned on.

disable: The switch is turned on off.

unknown: The status of the switch is unknown.

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 25035

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next