No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change system custom

change system custom

Function

The change system custom command is used to modify the system configuration registered by a third-party platform.

Format

change system custom <cluster_id> [alarmOn=?] [areaCode=?] [baseURL=?] [dsmpUrl=?] [floatIp=?] [systemSwitch=?] [thirdPartySwitch=?]

Parameters

Parameter

Description

Value

cluster_id Cluster ID.

The value is a string of 1 to 127 characters, including letters, digits, hyphens (-), underscores (_), and periods (.).

alarmOn Alarm switch.

Off(0):alarm reporting is enabled.

On(1):alarm reporting is disabled.

thirdPartySwitch Switch used to connect to a third-party platform.

off(0):cannot be accessed.

on(1):can be accessed.

areaCode Area Code.

The value is an integer ranging from 1 to 100,000,000.

baseURL Request URL of the distributed storage.

The value is a string of 1 to 127 characters starting with http://, for example, http://8.39.62.223.

clusterName Cluster name.

The value is a string of 1 to 127 characters, including letters, digits, hyphens (-), underscores (_), and periods (.).

dsmpUrl URL of the third-party platform.

The value is a string of 1 to 127 characters starting with http://, for example, http://8.39.62.223.

systemSwitch Identifier for storage system to access a third-party platform.

off(0):no accessed.

on(1):be accessed.

floatIp Front dynamic IP address of a node.

The value is a character string in the format of an IPv4 address, such as 52.1.62.7.

Level

Super administrator

Usage Guidelines

None

Example

Modify the system configuration registered by a third-party platform.

 admin:/>change system custom DFS-62-2231535703331589 alarmOn=On baseURL=http://8.39.62.223 floatIp=52.1.62.70 systemSwitch=Off thirdPartySwitch=on
Command executed successfully.

System Response

None

Download
Updated: 2019-07-25

Document ID: EDOC1100067955

Views: 27446

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next