No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show infoequalizer node general

show infoequalizer node general

Function

The show infoequalizer node general command is used to query information about the nodes of a protocol cluster.

Format

show infoequalizer node general [ id=? ] [ zone_id=? ]

Parameters

Parameter

Description

Value

id ID of a node in a protocol cluster.

The value contains <node_id>_<zone_name> with node_id using 1 to 127 digits and zone_name string using alphanumeric, _(underscore), .(dot) , or -(hyphen)(length is from 3 to 80).The first zone_name character must be alphabet, and the last zone_name character can not be .-_.., press Ctrl+A to view available list.

zone_id Zone ID of a node in a protocol cluster.

The value contains 3 to 80 letters, digits, hyphens (-), underscores (_), and periods (.), and must start with a letter and end with a letter or a digit.

You can press Ctrl+A to view the available values of zone_id.

Level

Device administrator

Usage Guidelines

Read-only users can also run this command to view information.

Example

Query information about the nodes of a protocol cluster.

 ID                 Zone ID      Node ID  Name   RunningStatus  Description  External Dynamic IP  External IP
  -----------------  -----------  -------  -----  -------------  -----------  -------------------  ----------------------------
  5641_zone8         zone8        5641     NODE2  Enabled                                          192.168.52.22,192.168.52.222
  5641_zone9         zone9        5641     NODE2  Enabled                                          192.168.52.22,192.168.52.222

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

ID of the node in the protocol cluster.

Zone ID

ID of the protocol cluster zone.

Node ID

ID of a node.

Name

Name of the node in the protocol cluster.

RunningStatus

Status.

Description

Description.

External Dynamic IP

Dynamic external IP address and front-end network IP address, which are used by the storage system to communicate with clients through NFS.

External IP

Static external IP address and front-end network IP address, which are used by the storage system to communicate with clients through CIFS.

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24960

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next