No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete infoequalizer ippool

delete infoequalizer ippool

Function

The delete infoequalizer ippool command is used to delete an IP address from the IP address pool of a protocol cluster.

Format

delete infoequalizer ippool < ippool_id >

Parameters

Parameter

Description

Value

ippool_id IP address pool ID.

The value can only contain 1 to 127 digits.

You can press Ctrl+A to view the available values of ippool_id.

Level

Device administrator

Usage Guidelines

None

Example

Delete an IP address from the IP address pool of a protocol cluster.

admin:/>delete infoequalizer ippool 10
WARNING: You are about to delete the IP addresses. You can delete IP addresses that have not been allocated to nodes only.
Have you read warning message carefully?(y/n)y
 
Are you sure you want to perform the operation?(y/n)y
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24736

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next