No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change camera general

change camera general

Function

The change camera general command is used to change the public parameters of a camera.

Format

change camera general <camera_id> <camera_protocol> [camera_name=?]

change camera general <camera_id> <camera_protocol> [camera_name=?] [camera_ip=?] [camera_port=?]

Parameters

Parameter

Description

Value

camera_id Camera ID.

The value is a string of 1 to 20 characters excluding the slash (/) and cannot be a period (.) or two periods (..). \s indicates a space, \| indicates |, \q indicates ?, and \\ indicates \.

camera_protocol Camera Protocol.

standard: Standard Protocol

hikvision: Hikvision SDK

dahua: Dahua SDK.

camera_name Camera name.

The value is a string of 1 to 64 characters. \s indicates a space, \| indicates |, \q indicates ?, and \\ indicates \.

camera_ip Camera IP address.

Valid IPv4 format.

camera_port Camera port.

1~65535.

Level

Resource administrator

Usage Guidelines

You can run the change camera general command to change the public parameters of a camera.

Example

  • Change the public parameters of a camera that uses the standard protocol.

    admin:/>change camera general camera001 standard camera_name=cameraname
    WARNING: You are about to modify the common parameters. If the parameter settings are incorrect, image data may fail to be received.
    Have you read warning message carefully?(y/n)y
    Are you sure you want to perform the operation?(y/n)y
    Command executed successfully.
  • Change the public parameters of a camera that uses the SDK protocol.

    admin:/>change camera general camera002 hikvision camera_name=cameraname camera_ip=192.168.10.10 camera_port=8088
    WARNING: You are about to modify the common parameters. If the parameter settings are incorrect, image data may fail to be received.
    Have you read warning message carefully?(y/n)y
    Are you sure you want to perform the operation?(y/n)y
    Command executed successfully.
     

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 25175

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next