No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change ssd_abrasion_threshold

change ssd_abrasion_threshold

Function

The change ssd_abrasion_threshold command is used to modify the settings of the SSD abrasion thresholds.

Format

change ssd_abrasion_threshold < lowAbrasion > < midAbrasion > < highAbrasion >

Parameters

Parameter

Description

Value

lowAbrasion Low abrasion (%).

The value is between 50 and 70.

midAbrasion Medium abrasion (%).

The value is between 71 and 90.

highAbrasion High abrasion (%).

The value is between 91 and 98.

Level

Device administrator

Usage Guidelines

None

Example

Modify the settings of the SSD abrasion thresholds.

admin:/>change ssd_abrasion_threshold 50 71 91
Command executed successfully.

System Response

None

Download
Updated: 2019-07-25

Document ID: EDOC1100067955

Views: 27492

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next