No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change keystone general

change keystone general


The change keystone general command is used to configure keystone.


change keystone general [admin_tenant_name=?] [admin_user=?] [auth_host=?] [auth_port=?] [auth_protocol=?] [insecure=?] [operator_roles=?] [reseller_prefix=?]





admin_tenant_name admin tenant name.

The value contains 1 to 63 characters, including letters and digits. The default value is "cookbook".

admin_user admin user name.

The value contains 1 to 63 characters, including letters and digits. The parameter is "swift".

auth_host IP address of keystone.

The value must be an valid IPv4 address and contains a maximum of 16 characters. The default value is "".

auth_port Port ID of keystone.

The value ranges from 1 to 65,535. The default value is "35357".

auth_protocol Authentication protocol.

The value can be "https" or "http".

insecure Whether to request the server for authentication.

If "auth_protocol" is set to "https", this parameter must be configured. The parameter value can be"true" or "false".

operator_roles operator roles.

The value contains 1 to 1 to 4095 characters, including letters and digits. Multiple roles can be set, but they must be separated from each other using semicolons (;). The setting takes effect only when the role name is the same as that configured on keystone. The default value is "admin;swiftoperator".

reseller_prefix URI prefix.

The value contains 1 to 63 characters, including letters and digits. No slashes (/) can be contained. The default value is "AUTH_".

url_prefix URL prefix.

The value contains 1 to 63 characters, including letters, digits, underscore(_), slash(/) and hyphens (-). The first and last character can not be slash(/).


Device administrator

Usage Guidelines

To configure keystone, run the "change keystone general" command.


Modify keystone configurations.

admin:/>change keystone general admin_tenant_name=cookbook admin_user=swift auth_host= auth_port=35357 auth_protocol=https true operator_roles=admin;swiftoperator reseller_prefix=AUTH_ url_prefix=idntity-admin
Command executed successfully.

System Response


Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24625

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next