No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show nfs status

show nfs status

Function

The show nfs status command is used to check the NFS status.

Format

show nfs status

Parameters

None

Level

Read-only user

Usage Guidelines

None.

Example

Check the NFS status.

admin:/>show nfs status
 
  Controller  Name  healthStatus   connectedClientAmount  
  ----------  ----  -------------  ---------------------  
  21          NFS   HEALTH_NORMAL  0                      
  23          NFS   HEALTH_NORMAL  0                      
  25          NFS   HEALTH_NORMAL  0

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Controller

Controller ID.

Name

Service name (NFS).

healthStatus

Running status

HEALTH_UNKNOWN: Unkown

HEALTH_NORMAL: Nomal

HEALTH_FAULT: Fault

HEALTH_PART_BROKEN: Part broken.

connectedClientAmount

Number of clients that have been mounted to the connection.

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24358

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next