No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show system ncq_status

show system ncq_status

Function

The show system ncq_status command is used to query the disk NCQ status.

Format

show system ncq_status

Parameters

None

Level

Resource administrator

Usage Guidelines

  • Enabling the NCQ switch improves the performance of SATA disks and prolong service lives of SATA disks.
  • The C72 node does support the disk NCQ function. The NCQ function is disabled.

Note:Enabing NCQ can take effect only after hardware NCQ is enabled.

Example

To query the disk NCQ status, run the following command.

admin:/>show system ncq_status
 
  ncq_status ncq_status_value 
  ---------- ---------------- 
  open       32

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ncq_status

Disk NCQ status.

ncq_status_value

Disk NCQ status value.

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 25273

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next