No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change node general

change node general

Function

The shchange node general command is used to change node information.

Format

change node general <id> [devMgrIPv4=?] [devMgrIPv6=?]

Parameters

Parameter

Description

Value

id Node ID.

The value can contain only 1 to 127 letters, digits, hyphens (-), underscores (_), and periods (.).

devMgrIPv4 Device management IPv4 address.

The value is a character string in the format of an IPv4 address.

devMgrIPv6 Device management IPv6 address.

The value is a character string in the format of an IPv6 address.

Level

Device administrator

Usage Guidelines

change node general <id>[devMgrIPv6=?]. Only the general server supports the modification of device management IP address in the IPv6 format.

Example

Modify the device management IP address of a node.

admin:/>change node general 36137 devMgrIPv4=192.168.100.10
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 25272

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next