No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
stop upgrade

stop upgrade

Function

The stop upgrade command is used to stop the online upgrade of a cluster.

Format

stop upgrade

Parameters

None

Level

Super administrator

Usage Guidelines

  • This command applies only to online upgrade.
  • After this command is executed, ongoing upgrades will continue and nodes whose upgrade is not started will not be upgraded.

Example

Stop the online upgrade of a cluster.

admin:/>stop upgrade
WARNING: You are about to stop the online upgrade task, it would cause some nodes will not be upgraded.
Have you read warning message carefully?(y/n)y
 
Are you sure you want to perform the operation?(y/n)y
Command executed successfully.

System Response

None

Download
Updated: 2019-07-25

Document ID: EDOC1100067955

Views: 27580

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next