No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show infoequalizer ippool

show infoequalizer ippool

Function

The show infoequalizer ippool command is used to query the dynamic IP addresses of protocol clusters.

Format

show infoequalizer ippool

Parameters

None

Level

Device administrator

Usage Guidelines

None

Example

Query the dynamic IP addresses of protocol clusters.

admin:/>show infoequalizer ippool
    
  ID IP              isUsed nodeName subnetId
  -- --------------- ------ -------- --------
  1 192.168.0.1/24   false  Node1    1

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

IP address pool ID.

IP

IP address.

isUsed

Whether the IP address is in use.

nodeName

Node name.

subnetID

Subnet ID.

Download
Updated: 2019-07-25

Document ID: EDOC1100067955

Views: 27609

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next