No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change worm_logdir

change worm_logdir

Function

The change worm_logdir command is used to set a WORM log directory.

Format

change worm_logdir < logdir >

Parameters

Parameter

Description

Value

logdir Directory path.

The value must start with a slash (/) and be 1 to 4000 characters in length. For example, /wormlog.

Level

Administrator

Usage Guidelines

This command is used to initialize a WORM log directory. The log directory can be set only once and the setting cannot be modified.

Note:

If the soft clock is not set, only the command that sets the WORM soft clock can be executed.

If the log directory is not set, privilege cannot be deleted, because the deletion is recorded in system logs.

Example

Set a WORM log directory.

admin:/>change worm_logdir /wormlog
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 25278

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next