No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change infoequalizer staticdomain

change infoequalizer staticdomain

Function

The change infoequalizer staticdomain command is used to modify the static domain name of a protocol cluster.

Format

change infoequalizer staticdomain < domain >

Parameters

Parameter

Description

Value

domain Domain name.

The value is a character string consisting of letters, numbers, periods (.), and hyphens (-). Each level of the domain name consists of a maximum of 63 characters, and levels are delimited by dots (.). The domain name (including dots) consists of a maximum of 251 characters in total. If there are sub-clusters under this domain name, the domain name and those of it's sub-clusters combined must not exceed 251 characters in length. Each level cannot start or end with a hyphen (-).

Level

Device administrator

Usage Guidelines

None

Example

Modify the static domain name of a protocol cluster.

admin:/>change infoequalizer staticdomain static.com
WARNING: You are about to change the InfoEqualizer domain name.After the domain name is changed, clients must use the new domain name to access the domain. Clients that have been connected to the domain before the change are not affected.
Have you read warning message carefully?(y/n)y
 
Are you sure you want to perform the operation?(y/n)y
Command executed successfully.

System Response

None

Download
Updated: 2019-07-25

Document ID: EDOC1100067955

Views: 27561

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next