No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show node count

show node count

Function

The show node count command is used to query the number of nodes in a cluster.

Format

show node count < parent_type > < cluster_id > [ func_type ]

Parameters

Parameter

Description

Value

parent_type System type.

The value is snas_system, indicating an storage system.

cluster_id Cluster ID.

The value contains 1 to 127 letters, digits, hyphens (-), underscores (_), and periods (.).

func_type Function type of a node.
  • p_node.
  • c_node.
  • m_node.
  • c72_node.
  • p25_node.
  • p36_node.
  • c36_node.
  • p12_node.
  • p12e_node.
  • p25e_node.
  • p36e_node.
  • c36e_node.
  • c36e_h_node.

Level

Read-only user

Usage Guidelines

None

Example

Query the number of nodes in a cluster.

admin:/>show node count snas_system AutoDeployQcc_1 p36e_node
 
  Count: 3

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Count

Number of nodes.

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 25016

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next