No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change snmp ip_style

change snmp ip_style

Function

The change snmp ip_style command is used to set the IP address types supported by SNMP.

Format

change snmp ip_style <ip_style>

Parameters

Parameter

Description

Value

ip_style IP address type supported by SNMP.

IP address type supported by SNMP.

  • IPv4.
  • IPv6.

Level

Administrator

Usage Guidelines

SNMP does not support two types of IP addresses at the same time.

Example

Set the IP address types supported by SNMP.

admin:/>change snmp ip_style IPv4
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24993

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next