No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change infoequalizer zone description

change infoequalizer zone description

Function

The change infoequalizer zone description command is used to modify the description of a protocol cluster zone.

Format

change infoequalizer zone description < id > < description >

Parameters

Parameter

Description

Value

id Zone ID of a node in a protocol cluster.

The value contains 3 to 80 letters, digits, hyphens (-), underscores (_), and periods (.), and must start with a letter and end with a letter or a digit.

You can press Ctrl+A to view the available values of id.

description Description.

The value contains 1 to 255 characters.

Level

Device administrator

Usage Guidelines

None

Example

Modify the description of a protocol cluster zone.

admin:/>change infoequalizer zone description zone1 domain
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 25154

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next