No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show infoequalizer zone general

show infoequalizer zone general

Function

The show infoequalizer zone general command is used to query information about the zones of a protocol cluster.

Format

show infoequalizer zone general [ id ]

Parameters

Parameter

Description

Value

id Zone ID of a node in a protocol cluster.

The value contains 3 to 80 letters, digits, hyphens (-), underscores (_), and periods (.), and must start with a letter and end with a letter or a digit.

You can press Ctrl+A to view the available values of id.

Level

Device administrator

Usage Guidelines

  • Run the show infoequalizer zone general [id] command to query information about the specified zone of a protocol cluster.
  • Run the show infoequalizer zone general command to query information about all zones of a protocol cluster.

Example

Query information about the zones of a protocol cluster.

admin:/>show infoequalizer zone general 
 
  ID   Name  RunningStatus  Description  Domain   SubNetID  SubNetName  BalanceStrategy  
  ----  ----  -------------  -----------  -------  --------  ----------  ---------------  
  root  root  Enabled     system_zone  default  1      default    Polling

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

ID of the protocol cluster zone.

Name

Name of the protocol cluster zone.

RunningStatus

Status.

Description

Description.

Domain

Domain.

SubNetID

Subnet ID.

SubNetName

Subnet name.

BalanceStrategy

Balance strategy of zone.

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 25010

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next