No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change ndmp_service general

change ndmp_service general

Function

The change ndmp_service general command is used to change the general information about NDMP service ports.

Format

change ndmp_service general [ is_enabled=? ] [ port=? ] [ write_thread_hold=? ] [ is_support_snapshot=? ] [ ignore_CTime=? ]

Parameters

Parameter

Description

Value

is_enabled Whether to start the NDMP service

The value is "true" or "false", where:

  • "true": to start the service.
  • "false: not to start the service.
port Listen port

The value is between "10,000" and "10,099".

write_thread_hold Write threshold

The value is a percentage (0 to 100).

is_support_snapshot Whether to enable snapshot

The value is "true" or "false", where:

  • "true": to enable snapshot.
  • "false: not to enable snapshot.
ignore_ctime Whether to ignore when files are created

The value is "true" or "false", where:

  • "true": to ignore the time.
  • "false: not to ignore the time.

Level

Resource administrator

Usage Guidelines

None

Example

Change the general information about NDMP service ports.

admin:/>change ndmp_service general port=10008
CAUTION: You are about to modify the ndmp service's port. To make sure the setting of port will take effect, you need to restart ndmp service.
Do you wish to continue?(y/n)y
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 25234

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next