No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change node startup

change node startup

Function

The change node startup command is used to start a node.

Format

change node startup < node_list > < ipmi_pwd >

Parameters

Parameter

Description

Value

node_list Node IDs.

The value can contain 1 to 4094 letters, digits, hyphens (-), underscores (_), and periods (.). If you want to start multiple nodes in batches, separate their IDs with vertical bars (,).

ipmi_pwd Password for logging in to the IPMI.

The value contains 1 to 63 characters.

Level

Device administrator

Usage Guidelines

After this command is executed, the node starts in about five minutes.

Example

Start a node.

admin:/>change node startup 52137
Please enter IPMI password:*************
Please enter IPMI password again:*************
Command sent successfully.Please use command 'show task general' for details.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24971

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next